Applying TCI 503 HD
Apply TCI 503 from bottom up. Work in small areas about five feet in length. Allow TCI 503 to work for 60 to 90 seconds then scrub with a soft wash brush. Do not let TCI 503 dry on surface.
|
|
 |
 |
Washing Off TCI 503 HD
Remove TCI 503 with a pressure washer with 3000psi or greater cold water from the bottom up, then from the top own, keeping
the pressure washer almost touching the aluminum. Rinse thoroughly.Then rinse again. |
Do not use TCI 503 in direct sun light
Do not let TCI 503 Dry on surface
Avoid using on windy days
Read Manufactures Directions
Wheels & Fuel Tanks Apply TCI 503 With Quart Spray Bottle
|
|
Washing Truck With TCI 710 HD Brushless Soap
Cool surface to be cleaned. Do not wash in direct sun light.
Mornings and early evenings are best. Mix 10 parts water to 1 part soap and apply with garden sprayer from bottom to top. Allow two to three minutes for soap to work. Do not let soap dry.
|
|
 |
 |
Washing Off TCI 710 HD
Remove TCI710 with a pressure washer 3000psi or greater from bottom
to top and then back down again keeping the pressure washer two inches away. Rinse thoroughly until no soap residue is visible.
|
|
